Download External Recovery Startup Software For Mac Mohaje Newest

Chances are, the Mac with the disk, where the data was lost, will be able to start from the boot drive created. We officially recommend running data recovery on your startup disk ONLY when your Mac is booted from a different drive, using external docking stations, or Disk Drill's own bootable data recovery. . If the Mac has Filevault enabled with full disk encryption you will need to choose “Unlock” and enter the Filevault password before you can reinstall macOS Mojave onto the computer. When installation has completed, the Mac will boot up as usual with freshly reinstalled macOS Mojave system software. If your Mac shipped with MacOS Mojave, restart and hold down the Shift, Option, Command, and R keys at the same time. This will instantly install Mojave from a picture located on a dedicated partition. Else, connect your Mac to the internet, connect the external drive, and restart through the Apple icon in the top left corner.

Summary:How to recover deleted or lost data from external hard drive under macOS 10.14 Mojave? Don’t worry, download this powerful, easy to use and cool external hard drive data recovery software for macOS Mojave. It will help you securely recover deleted, formatted or inaccessible data from external hard drive under macOS Mojave.

Millions of Mac users turn to external hard drives to save their information so as not to saturate the main hard drive where macOS Mojave is installed, but often these external hard drives are prone to losing data due to the extensive use they have that make them vulnerable to this happening. Bad as errors in disconnection or connection to the system, viruses, reading and writing errors, power outages, formatting or even an accidental deletion can make us lose valuable data for us.

If you have gone through any of these situations with your external hard drive under macOS Mojave and you are desperate because you need the data you have lost, the first thing you should do is to remain calm, since there is currently a fairly simple and fast solution that It will make the days of taking the external hard drive to technical service to recover your lost data remain in the past.

The best external hard drive data recovery software for MacOS Mojave

Undoubtedly the number one software to recover lost and deleted data on external hard drives under macOS 10.14 Mojave is Magoshare Data Recovery for Mac. It has full ability to recover deleted or lost data from external hard drive or USB flash drive under macOS 10.14 Mojave. It can even recover data from damaged, formatted or inaccessible external hard drive under macOS Mojave.


Magoshare Data Recovery for Mac will allow you to recover lost data from your external hard drive under macOS Mojave in simple steps. Just download and install Magoshare Data Recovery for Mac in macOS Mojave, connect your external hard drive and follow these simple steps, you can have all your data back:

Step 1: Select your external hard drive.

Before starting Magoshare Data Recovery for Mac, you have to connect the external hard drive so that you can recognize it in this way. To start recovering your lost data, just select the external hard drive.

Step 2: Scan the external hard drive to recover lost data.

Just click on the 'Scan' button so that Magoshare Data Recovery for Mac starts scanning the external hard drive to find deleted or lost data.

Step 3: Preview and recover your lost or deleted data from your external hard drive.

After finishing the scan, Magoshare Data Recovery for Mac will show you a list with all the lost and deleted data that can be recovered from the external hard drive. You just have to select which files you want to recover by simply clicking on the 'Recover Now' button to save them.

With the best external hard drive data recovery software for macOS Mojave, you can easily and completely recover lost data from local/external hard drive, USB flash drive, memory card, etc. You just need to download and install this software on your macOS Mojave computer, then run it to recover your lost data easily and quickly.

Related Articles

Nov 12, 2020 • Filed to: Answer Hard Drive Problems • Proven solutions

Q: How to resolve startup issues on macOS Mojave?
'Recently, I had an unusual issue in the startup of macOS Mojave, which is completely something new to me. I don't have a clue that what is the backstory of the issue and how to solve the problem. I am in urgent need of help!'

There are various cases that people complaining about startup probelms on macOS Mojave. When you are trying to initiate the system, it is trapped. In the condition, you might have a big question 'What is wrong with my computer?'. Don't be panic. This article has listed 8 common-seen startup issue.

Even if you have lost your data due to worrisome startup problems. Here you can find the most proffessional tool to retrieve your data.

You must cannot wait. Let's settle it together!

Part 1: Common Mojave startup issues

People from all around the world have reported different start-up issues in macOS Mojave. Many people complain that 'mac will not boot' or 'mac safe mode is not working'. Among all the complaints, we summarize 8 common-seen problems and listed as followed.

Kindly check whether it is happening to you or not.

Issue 1: Mac does not power on

There might be a scenario where the Mac doesn't even power on because of various causes. This is the most common macOS Mojave startup issue. Most people report that the Mac does not power on. Here's the troubleshooting for this issue;


There are different solutions for laptop and desktop users.

Laptop users: you need to connect the charger to your Mac and then press the 'Power' button to solve the issue.

Desktop users: if you are having this issue on the desktop, you need to check the power connection, switch, and power cord. If the power cord has a problem, replace it. Then re-switch on your computer..

Issue 2: macOS Mojave stops responding at the startup

Many people report that the macOS Mojave stops responding at the startup. In this case, the macOS Mojave is powered on but it stops responding while getting started. In this issue you need to follow this solution;


Hard restart: If your Mac stops responding at the startup, it's a sign that you need to restart the hard. You need to press and hold the power button until the device is forced to shut down. Now you need to wait for a while, then press the power button again to turn on the Mac without any issue.

Issue 3: macOS Mojave does not start/boot

This macOS Mojave issue is that when the Mojave does not even boot. So, to tackle this issue you need to follow the troubleshooting below;


There is more than one method to solve this dilemma, follow them carefully.

Reset non-volatile Ram & parameter Ram:

In this method, you need to firstly hard restart your Mac using the guidelines mentioned in the above methods. Instantly after the hard restart, you need to press and hold 'Option + Command + P +R' keys until you hear the second chime. After pressing the buttons, you need to wait for macOS Mojave to reset NVRAM and PRAM.

Reset system management controller (SMC):

If you are using an iMac, Mac mini, or Mac Pro, you need to disconnect the power cable and then press and hold the power button approximately for 5 seconds to reset the SMC. Now after doing that, reconnect the power cables and turn on the Mac by pressing the power button.

If you are using MacBook, MacBook Air, or MacBook pro which has a non-removable battery, then you need to force shut down the Mac by using these keys; press and hold 'shift' + 'control' + 'option' + 'power button' for 10 seconds, then you need to release the keys to reset system management control (SMC). Lastly, turn on the Mac.

In a case where you have Mac with a removable battery, then you first need to remove the battery. After removing the battery, press and hold the power button for 5 seconds to reset SMC. In the end, connect the battery and turn on your Mac.

Issue 4: macOS Mojave does not show desktop after startup

In this issue, the MacOS goes through the proper boot and everything else, but when it comes to desktop, the Mac Mojave is unable to display the desktop.


There are two methods to get rid of this issue in no time, follow these two mentioned below;

Boot from recovery drive:

You need to hard restart your Mac and then instantly press and hold the 'Command' + 'R' keys. You need to hold the keys until the Mac chimes, or you see the Apple logo.

Use disk utility:

In this step, you need to open the macOS utility window. After opening it, select disk utility and then the startup drive. You will see the option of 'First Aid', click the option. After clicking it, 'run' to check the drives for errors. Furthermore, click 'Done' and close the disk utility. Now from the Apple menu, restart your Mac.

Issue 5: macOS Mojave crashes or fails to start

In this issue, you might see that the macOS Mojave has crashed or failed to start. You need to immediately follow this troubleshooting;


There are two fixes to solve this issue, here are the fixes;

Enter safe mode:

Firstly, for entering the safe mode, you need to restart the Mac. Immediately after restarting, press and hold the 'shift' key. Release the key when the login screen appears.

Remove recent apps:

In this method, log in once or twice if the file vault is on. Furthermore, disable or remove the latest applications that are causing this dilemma of a startup issue. Now, start up the Mac in normal mode.

Issue 6: macOS Mojave stuck in the grey screen during startup

People have reported that in this issue the grey screen gets stuck during startup and can't go further. Here's the troubleshooting;


To get rid of this grey screen, you either need to remove all external peripherals or remove only the bad ones.

Remove all external peripherals:

To remove all the external peripherals, you need to force shut down the Mac. After shutting it down, you need to remove all the external peripherals like printer, headset, ethernet cable, or any other. Then turn on the Mac again and see if the issue still exists.

Download External Recovery Startup Software For Mac Mohaje Newest

Replace the bad peripherals:

In this step, you need to connect every peripheral one by one. You need to identify that by which peripheral does the Mac gets stuck on the grey screen. Once you have identified the bad peripheral, replace it.

Issue 7: macOS Mojave stuck in the flashing question mark

if you see a question mark sign on your screen with white flashing background, don't worry, there are several solutions to this issue;



Here are the solutions to this dilemma;

Select startup disk in recovery mode:

In this first method, just hard reset your Mac and instantly press and hold 'Command' + 'R' keys. Only release the keys when the Mac chimes or you see the Apple logo on the screen. After that, select 'startup disk' from the Apple menu and then restart the Mac.

There might be a case, where 'startup disk' isn't available to you. In this case, you can repair the disk by using 'disk utility'> 'first aid' > 'run'. Now, select the start disk from the Apple menu and restart.

In situations where the Mac boots, you can also select system preferences from doc or the Apple menu and click startup disk. Furthermore, click the lock icon and insert the provide administrator password. Lastly, select the drive from the list of drives displayed on the screen, as the startup disk to eliminate the startup disk search process. After all, restart the Mac.

Issue 8: macOS Mojave always has a startup issue


If you keep on facing the macOS Mojave startup issue, you need to stick to the guide a little more.


You can follow these last two steps to completely solve your issue.

Reinstall macOS Mojave in recovery mode:

The First and foremost thing you must do is open the macOS utility window. Secondly, select 'reinstall macOS' and then click 'Continue'. The instructions will be displayed on your screen, follow them properly to finish the reinstallation process.

Erase the startup drive and reinstall macOS Mojave in recovery mode:

You need to open macOS utility windows in this method too. Furthermore, select the 'disk utility'. Once you have selected disk utility, choose the startup drive, and press the 'erase' button. You need to provide the details as per mac requirements and then click 'erase'. This will erase the startup drive. Select the erased startup drive in the reinstallation process of macOS Mojave in recovery mode.

Note: You need to make sure that you have already made a backup of your data before pressing the 'erase' button as it will erase all your valuable data on the drive.

Download External Recovery Startup Software For Mac Mojave Newest Mac

Part 2: Data recovery on macOS Mojave

If you haven't made a backup of your data before performing the above troubleshooting methods, and now you have lost your data. You might be willing to recover all the data as soon as possible. Don't worry your data is recoverable, you just need to use the data recovery software for Mac, mentioned below to get your data back.


Recoverit Data Recovery for Mac is remarkable enough to recover more than 1000+ types and formats of data. It can recover data from almost any of the storage devices used in the market. Recoverit for Mac is a widely known software all around the world. There are very few steps to be followed. Use these steps to restore your data from erased hard drive.

Step 1: Launch recoverit on Mac

The first task is to download and install the recoverit software on your Mac. Once it is installed, you can just double click the icon to run the application.

Step 2: Select the derive

Download External Recovery Startup Software For Mac Mojave Newest Os

Once you've opened the application, the steps are easy and simple after that. You need to select the drive under the 'Devices' option in front of you. Make sure you select the hard drive which you erased. Once you have recognized your hard drive. Click on the 'start' tab to move forward.

Step 3: Scan the location

Recoverit has an astonishing deep scanning process. Once you have pressed the tab of 'start' the software will start the deep scanning process for your erased hard drive. You can even either pause or resume the scanning process.

Step 4: Preview and recover files

The scanning process might take some time. After the process has been completed, you will be able to preview all the data you had lost when the drive was erased and found after the deep scanning process. You can preview multiple types of data, may it be videos, pictures, or audio. Now you need to select the button of 'recover' to enable the final and the most important recovering process. The recovery time of the data will depend upon the size of the data on the erased hard drive. Lastly, save your recovered data at the desired location.


The macOS Mojave is prone to startup issues as it is also an electronic device. You just need to get a proper guide to get yourself out of the devastating situations. The only thing that you must keep in mind is that make a backup of your data while you perform any of the troubleshooting tasks.

Download External Recovery Startup Software For Mac Mojave Newest Windows 10

What's Wrong with Drive

Download External Recovery Startup Software For Mac Mojave Newest Version

Recover Your Drive
Fix Your Drive
Format/Wipe Drive
Know Your Drive